A shoe is made of upper and lower components. The upper component is divided into the vamp, quarter, toe box, throat, insole board, and topline. The lower component is the outsole, shank and heel.

The upper component of the shoe is usually made of a variety of materials and is designed to allow the foot to breathe. The counter is a component of the upper that stabilizes the hind foot and retains the shape of the posterior (back) portion of the shoe. The counter can extend to support the heel and help prevent excessive pronation (rotation that is inward and downward). The toe box is the area the covers the toes and should allow room for the toes to move freely.
The lower portion of the shoe consists of the sole, shank and heel. The sole is divided into the insole and the outsole. The outsole should be waterproof, durable and possess some level of friction high enough to prevent slipping. The shank reinforces the shoe to prevent distortion of the shape of the shoe from regular wear. The heel is designed to hit the ground with each step forward.

Footwear has been identified as an environmental risk factor for both indoor and outdoor falls (Connell et al.). Somatosensory feedback to the foot and ankle are extremely important in balance and to prevent slipping or tripping. At you can customize your shoes for yous special needs.

In a study done by Munro et al it was found that older people typically wear slippers because they are comfortable and can be worn without increasing discomfort from foot deformities. However, in a sample of 312 older persons, those who wore slippers had more foot pain and significantly greater fall risks compared to those who wore fastened shoes or no shoes at all (Mickle et al). In fact, numerous studies report that walking barefoot or wearing socks or slippers increased fall risk by up to 11 percent as compared to wearing athletic or canvas shoes (Koepsell et al). Most falls occurred in peoples’ homes (48%), where slippers are the most commonly worn footwear (Sherrington et al). Keegan et al found that slip on shoes, sandals, medium to high heel height and narrow shoes were also contributing factors to increased foot fracture from falls in people over 45 years of age (Keegan et al).

Since wearing slippers or socks can lead to increased fall risk, it is recommended that you wear shoes even when inside your home. You may want to keep a specific pair of comfortable shoes for indoor use only if you are concerned about bringing dirt in from the outside. For people who must or prefer to wear slippers in the home, it is best to choose slippers that are well-fitting and have a closed back and non-skid sole.

Many people assume that walking without shoes would decrease their fall risk because it improves their ability to feel the ground. However, studies show this may not be the case, especially for older people who have worn shoes since childhood. Robbins et al noted that joint position sense was 162% lower in older individuals as compared to their younger counterparts, possibly due to an age related decline in proprioception (i.e. the ability to sense stimuli arising within the body regarding position, motion, and equilibrium). In addition, community dwelling older individuals tasked with walking on a 7.8 cm wide beam fell more frequently when barefoot than while wearing shoes (Robbins et al). This study demonstrates that when a persons’ balance is challenged they perform better wearing shoes than when they were barefoot. We can conclude from these findings that wearing shoes improves stability and reduces the risk of slipping.

It is important that your shoes are the appropriate fit. Due to painful feet, many people wear shoes that are too large (long or wide), which can lead to an increased risk of falls (Burns et al).

Heel elevation has been associated with a greater risk of falling in older people (Gabell et al). Therefore, your shoes should have a low heel. It has been shown that shoes with a higher heel have a negative affect on posture, balance and gait, and are therefore associated with an increased fall risk. The recommendation is to wear a shoe with a heel height of 2.7 cm or less.

Older people’s balance and positional sense awareness is worse in shoes with a thick, soft midsole (Robbins et al). Shoes with a soft sole caused more imbalance because people require more muscle activity to maintain their balance (Perry et al). Therefore, older people should wear a shoe with a thin, hard sole to improve foot position and optimize balance.

The research regarding the benefit of a high top shoe vs. a low collar shoe remains inconclusive. It is thought that a high collar shoe will support the ankle joint and improve ankle stability. This has been found to be true in young adults performing multiple sports (Ottaviani et al). However, the research for high collar shoes for people with balance disorders requires further investigation.

Gard and Berggard compared shoes with tread in different locations on the sole (whole foot tread, toe antiskid devices, and heel tread) and found that heel tread is best for reducing slips and trips. It was also found that a rubber heel with a bevel of 10 degrees provides greater contact with the floor and therefore improved slip resistance.

Add a comment